![]() |
![]() |
![]() |
![]() |
![]() |
Taper Gages |
||||||||||||||
![]() |
![]() |
|||||||||||||
These gages take axially (X&Y) clearance readings between the packing and the packing gland on the rotor. Their design permits you to take the reading and clear the packing bore and rotor. Reading can be taken on turbine wheels, diaphrams, packing, bearing clearances, as well as other applications. | ||||||||||||||
|
![]() |
![]() |
|||||||||
Taper Gages: Radius Packing GageTakes the radius reading
between the packing and the shaft. It will clear the shaft and the rotor
below the joint for an accurate reading. |
||||||||||
![]()
|
|
![]() |
![]() |
||||||||||||||||||||||||||||||||||
This gauge is designed to take readings on turbine wheels, diaphragms, packing, bearing clearances, as well as other applications. This gauge replaces a full set of feeler gages. | |||||||||||||||||||||||||||||||||||
|
|
![]() |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||
![]() |
|
Copyright ©2010 Power House Tool, Inc. |