Taper Gauges |
||||||||||||||
These gauges take axially (X&Y) clearance readings between the packing and the packing gland on the rotor. Their design permits you to take the reading and clear the packing bore and rotor. Reading can be taken on turbine wheels, diaphrams, packing, bearing clearances, as well as other applications. | ||||||||||||||
|
Model
Number
|
Range
(inches) |
|
|
RXY25100 | .025 - .100 |
RXY50300 | .050 - .300 |
RXY275500 | .275 - .500 |
RXY450650 | .450 - .650 |
Takes the
radius reading between the packing and the shaft. It will clear the shaft
and the rotor below the joint for an accurate reading. Model RPG10115 - takes readings below the joint where the packing teeth are broken or damaged. Model RPG10115A - only takes readings at the horizontal joint,. |
||||||||||
|
Model
Number
|
Range
(inches) |
|
|
RPG10115 | .010 - .115 |
RPG10115A | .010 - .115 |
This gauge is designed to take readings on turbine wheels, diaphragms, packing, bearing clearances, as well as other applications. This gauge replaces a full set of feeler gauges. | |||||||||||||||||||||||||||||||||||
|
Model
Number
|
Range
(inches) |
Width
(inches) |
|
||
ES200 | .020 - .200 |
.25
|
100250 | .005 - .250 |
.25
|
100500 | .020 - .500 |
.25
|
200500 | .020 - .500 |
.375
|
3001000 | .450 - 1.000 |
.25
|
1001000 | .450 - 1.000 |
.375
|
2001000 | .370 - 1.000 |
.375
|
1001500 | .950 - 1.500 |
.375
|
1002000
|
1.450
- 2.000
|
.375
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||
|
Copyright ©2010 Power House Tool, Inc. |
|