Bolt
Heaters - Speed Heaters
Our new speed heater - this speed heaters will heat studs in approximately
6 minutes. Run multiple heaters simultaneously with temporary and portable power by Power House Tool, Inc.
|
8
Thread Turbine Dies - High Speed Steel
Turbine dies - 8 thread, taps and eyebolts including high speed
steel 8 thread and metric when needed. Quality turbine tools by
Power House Tool.
|
Specialty
and Custom Made Tools by Power House Tool, Inc.
Custom made tools including CVC tools, open end wrenches, wrenches
with thicker slugging ends, square body hex wrenches, 6pt slugging
and many more. You send us the drawing and we will make the specialty
or custom tool! |
8
Thread Turbine Eyebolts
Turbine eyebolts and reduced eye eyebolts for turbine maintenance.
Quality tools for plant shutdowns, including taps, dies, adapters,
and much more.
|
8
Thread Turbine Taps
Turbine taps including high speed steel 8 thread taps for turbines.
|
Adapters
for Turbine Maintenance
Adapters including hex bits and bar stock, hex head drivers, extension
sockets and much more.
|
Alignment
Tools: Head Set, Tight Wire Bracket Alignment Tools
Alignment tools for turbine maintenance including head set alignment
tools, vibrating kit, extension rods, and more for alignment in
your turbine maintenance tool needs.
|
Bolt
Heaters by Power House Tool, Inc. in Joliet, Illinois
Turbine tools, maintenance tools, electronic measuring devices,
gauges, eyebolts, wrenches, bolt heaters and just about anything
else for your plant maintenance department needs.
|
Bolt
Heaters by Power House Tool, Inc. in Joliet, Illinois
Turbine tools, maintenance tools, electronic measuring devices,
gauges, eyebolts, wrenches, bolt heaters and just about anything
else for your plant maintenance department needs.
|
Bolt
Heaters: Flexible and Standard Bolt Heaters - Try our Speed Heater!
Standard and flexible bolt heaters, gas bolt heater kits. Heat
studs fast and efficiently. Our bolt heaters and speed heaters
will not break apart.
|
Bolt
Heaters: Flexible and Standard Bolt Heaters - Try our Speed Heater!
Standard and flexible bolt heaters, gas bolt heater kits. Heat
studs fast and efficiently. Our bolt heaters and speed heaters
will not break apart.
|
Bolt
Heaters: Flexible and Standard Bolt Heaters - Try our Speed Heater!
Standard and flexible bolt heaters, gas bolt heater kits. Heat
studs fast and efficiently. Our bolt heaters and speed heaters
will not break apart.
|
Bolt
Heaters: Flexible and Standard Bolt Heaters - Try our Speed Heater!
Standard and flexible bolt heaters, gas bolt heater kits. Heat
studs fast and efficiently. Our bolt heaters and speed heaters
will not break apart.
|
Brass
Wedges - Wedging Diaphragm and Packing
Brass wedges for wedging diaphragm & packing against seal
face to take clearance readings. Turbine tools for the power industry
by Power House Tool, Inc.
|
Bridge
Micrometer - Elevation Readings
This bridge micrometer will read elevation differences between
two joints, heights of welds, crush pins, diaphragm keys and diaphragm
springs. Tool comes with 2 inch Starrett micrometer head.
|
Bridge
Micrometer, Stud Protractor, Steam Packing Readings
Chain Indicator Holder, Packing Tooth Scraper, Wedges and other
Turbine Tools for steam packing readings, and more.
|
Busters
and Sockets
impact hex, castellated and double hex insert busters and sockets
for your plant maintenance needs and outages.
|
Castellated
Busters - Turbine Tools
Our castellated busters can be applied throughout the plant. The
Buster's versatile design makes it compatible with slugging, impact
and hydraulic wrenching.
|
Castellated
Slugging Wrenches
turbine wrenches such as spanner, striking, crown, slotted and
special wrenches available for turbine maintenance.
|
Castellated
Sockets for Turbine Maintenance
Castellated, slotted sockets for turbines sometimes called crown
sockets or hex sockets.
|
Chain
Indicator Holder - Checking Alignment
Starting at 1/2 inch diameter shafts, this chain indicator can
check alignment on just about any size diameter shaft by just
adding chain. Unit comes with a 24 inch chain. Maintenance Tools
by Power House Tool, Inc.
|
Cogen
Plant Maintenance Tools by Powerhouse Tool, Inc.
Power House Tool, Inc. has the cogen plant maintenance tools used
by maintenance crews throughout the world to reduce downtime during
a turbine outage, downtime or turnaround in nuclear power plants
and other industrial applications.
|
Cogeneration
Turbine Maintenance Tools by Powerhouse Tool, Inc.
Power House Tool, Inc. has the cogeneration turbine maintenance
tools used by maintenance crews throughout the world to reduce
downtime during a turbine outage, downtime or turnaround in nuclear
power plants and other industrial applications.
|
Combine
Cycle Maintenance Tools by Powerhouse Tool, Inc.
Power House Tool, Inc. has the combine cycle maintenance tools
used by maintenance crews throughout the world to reduce downtime
during a turbine outage, downtime or turnaround in nuclear power
plants and other industrial applications.
|
Double
Hex Insert Busters
these double hex insert sockets are compatible with slugging,
impact and hydraulic wrenching.
|
Feeler
Gages - Radius, Packing, Straight, Metric Feeler Gages
Feeler gages for throat or diaphragm readings, rotor clearance
readings, axial clearance readings, blade readings and steam path
audit.
|
Feeler
Gauges - Radius, Packing, Straight, Metric Feeler Gauges
taper gages for throat or diaphragm readings, rotor clearance
readings, axial clearance readings, blade readings and steam path
audit.
|
Flexible
Bolt Heaters: Power Flex
Flexible bolt heaters for heating studs in hard to reach clearance
areas. This stud heater is flexible and will bend; durable construction.
|
Gas Bolt Heater Kits
Gas bolt heater kit for turbine maintenance and plant shutdown
or outages.
|
Head
Set Alignment Kits - Vibrating Alignment Kits
tightwire brackets and headset alignment kits and tools as well
as other turbine assembly alignment tools. For rotor and lasor
alignment and steam path audit.
|
Hex
Bits for Adapters: Adapter Extensions
Hex bits, extensions, adapters including hex bits and bar stock,
hex head drivers, extension sockets and much more.
|
Hex
Head Drivers and Adapters
hex head drivers including square head drivers.
|
Hex
Head Drivers for Turbine Maintenance
Hex head drivers including hex bits and bar stock, extension sockets
and much more.
|
Hex
Long Arm Wrenches - Allen Wrenches
Our hex long arm wrenches are sometimes called allen wrenches;
for turbine maintenance during your plant shut down or other outage
needs. Quality turbine tools by Power House Tool, Inc.
|
Hot
Rods - Bolt Heaters
Standard and flexible hot rods, to heat studs. Heat studs fast
and efficiently. Our hot rods and speed heaters will not break
apart.
|
Impact
Hex Busters for Turbine Maintenance
Our impact hex busters can be used throughout the plant. For turbine
tooling and more. Compatible with slugging, impact and hydraulic
wrenching.
|
Impact
Sockets - Sockets with Square Drive
Impact sockets with square drive including 1 1/2 inch, and 2 1/2
inch for turbine maintenance in your plant.
|
Induction Bolt Heating -
Our induction bolt heaters are available in standard,flexible
and gas. Heat studs fast and efficiently. Our induction bolt heaters
and speed heaters will not break apart.
|
Induction Bolt Heating - Heat Rods Quickly
Our induction bolt heating tools will heat rods and studs quickly
with our bolt heaters. Including standard, flexible and gas induction
bolt heating tools. Turbine tools and power industry tools for
maintenance work by Power House Tool.
|
Induction Heating
Induction heating using portable power supply unit for bolt and
stud heating in a steam or gas turbine.
|
Industrial
Slugging Wrenches - Standard or Custom
Industrial slugging wrenches for turbine mainteance in regular
or offset styles. We can custom make 6 point if required. Also
available in castellated, hex long arm.
|
Jack
Bolts - Turbine Shell Casing
The jack bolts are used help separate the turbine shell casing.
The jack bolt is threaded through the flange portion of the upper
shell casing and when it makes contact with the bottom casing
which is not threaded the two will start to separate.
|
Metric
Taper Gauges; Feeler Gauges - Black Taper Gauges Now Available
Metric taper gauges for throat or diaphragm readings, rotor clearance
readings, axial clearance readings, blade readings and steam path
audit.
|
Nuclear
Power Maintenance Tools by Powerhouse Tool, Inc.
Power House Tool, Inc. has the nuclear power maintenance tools
used by maintenance crews throughout the world to reduce downtime
during a turbine outage, downtime or turnaround in nuclear power
plant.
|
Packing
Tooth Scraper - For Steam Packing
Running the PTS01 over the damaged teeth on the steam packing
will re-establish the tapered edges. The adjustable tool bits
conform with the original packing. The handle has a knurled black
oxide finish for a longer life.
|
Petrochemical
Industry Portable Power: Temporary Power Refinery Turnarounds
Custom portable power and temporary power for refinery turnarounds
providing on-site power distribution from high voltages into usable
480/ 240/ 208/ 120 volt GFI protected distribution carts and panels
for lighting, welding and other maintenance power requirements.
|
Portable
Power - Portable Electric Distribution Centers
Work safe with our portable power electric power distribution
centers. Step down units available in the size you need for your
plant. Our portable power units are safe and dependable.
|
Portable
Power Temporary Power - Boiler and Turbine Outages
Custom portable power and temporary power for boiler and turbine
outages in fossil, nuclear and hydro power plants.
units safely step down house power from 600/ 480 volts into usable
240/ 208/ 120 volt GFI protected distribution carts and panels
for lighting, welding, heating, power tool and other maintenanc
|
Power House Tool
Standard and flexible bolt heaters, gas bolt heater kits. Heat
studs fast and efficiently. Our bolt heaters and speed heaters
will not break apart.
|
Power
House Tool's Bolt Heaters
bolt heaters, turbine tools, stud runners, measuring devices,
taper gauges and much more.
|
Radius
Taper gages; Feeler gages - Black Taper gages Now Available
Our radius taper gages take axially clearance readings between
the packing and the packing gland on the rotor. Turbine wheels,
diaphrams, packing, bearing clearances, as well as other applications.
|
Radius
Taper Gauges; Feeler Gauges - Black Taper Gauges Now Available
Our radius taper gauges take axially clearance readings between
the packing and the packing gland on the rotor. Turbine wheels,
diaphrams, packing, bearing clearances, as well as other applications.
|
Reduced
Eye Eybolts - "stubbys"
reduced eye eyebolts when turbine space is limited. 8 thread eyebolts
called stubbys.
|
Rotor
Alignment Tools - Tight Wire Alignment
Rotor alignment tools: tightwire brackets and headset alignment
kits as well as other turbine assembly tools. For rotor and lasor
and steam path audit.
|
Rotor
Alignment Tools - Tight Wire Alignment
Rotor alignment tools: tightwire brackets and headset alignment
kits as well as other turbine assembly tools. For rotor and lasor
and steam path audit.
|
Rotor
Alignment Tools - Tight Wire Alignment
Rotor alignment tools: tightwire brackets and headset alignment
kits as well as other turbine assembly tools. For rotor and lasor
and steam path audit.
|
Shore
to Ship Portable Power Units
Custom portable power and temporary power for ship to shore and
pier side power requirements. distribution centers
are used for retrofits and new ship building, transforming high
voltages into usable 480/ 240/ 208/ 120 volt GFI protected distribution
carts and panels for lighting, welding and other maintenan
|
Sockets
for Turbines
castellated, impact and wrench sockets for turbine maintenance
in your plant.
|
Stainless
Steel Extension Rods - 6" and 12"
6" and 12" stackable stainless steel threaded rods can be combined
to extend to the length required. They are easily shippped and
then assembled on-site. They can then be simply disassembled and
ready to ship for the next project. The rods will not oxidize
and have high portability.
|
Stud
Heaters: Flexible and Standard Stud Heaters
Standard and flexible stud heaters, gas stud heater kits. Heat
studs fast and efficiently. For heating studs in turbine maintenance
operations during shutdowns or routine maintenance operations.
|
Stud
Heating: Flexible and Standard Stud Heating Systems
Standard and flexible stud heating gas stud heatingkits. Heat
studs fast and efficiently. For heating studs in turbine maintenance
operations during shutdowns or routine maintenance operations.
|
Stud
Protractor - for Bolt Tightening
Our stud protractor is the tool that makes tightening a bolt to
the exact degree easy. Open protractor to the degree needed using
the measuring arm, mark the casing. Learn more now.
|
Stud
Removal - Removing Threaded Studs
Stud removal is easy with our BlackJack Stud Runner. Versatile
tool for removing or inserting threaded studs into blind stud
holes. Claming force on the end of the stud is generated by a
closing collet to grip the thread.
|
Taper
Gages - Radius, Packing, Straight, Metric Taper Gages
Taper gages for throat or diaphragm readings, rotor clearance
readings, axial clearance readings, blade readings and steam path
audit.
|
Taper
Gauges - Radius, Packing, Straight, Metric Taper Gauges
taper gages for throat or diaphragm readings, rotor clearance
readings, axial clearance readings, blade readings and steam path
audit.
|
Taper
Gauges; Feeler Gauges - Black Taper Gauges Now Available
taper gauges or feeler gauges: all taper of our gauges have an
adjustable shutter, taper gauges offered in nickel plated or black
oxide.
|
Taps,
Dies & Eyebolts
turbine tools for maintenance including eyebolts, turbine dies
and taps, and universal pivot rings.
|
Tight
Wire Alignment Tools - Tight Wire Brackets
Power House Tool heavy duty tight wire set used in turbine assembly
has micrometer heads to adjust industrial strenght grade rollers
for alignment readings on casings, shells, packing and diaphragms.
|
Tightwire
Alignment Tools
Power House Tool heavy duty tightwire set used in turbine assembly
has micrometer heads to adjust industrial strenght grade rollers
for alignment readings on casings, shells, packing and diaphragms.
|
Tightwire
Alignment Tools
Power House Tool heavy duty tightwire set used in turbine assembly
has micrometer heads to adjust industrial strenght grade rollers
for alignment readings on casings, shells, packing and diaphragms.
|
Turbine
Alignment Tools - Tight Wire Alignment
Turbine alignment tools - tightwire brackets and headset alignment
kits as well as other turbine assembly alignment tools. For rotor
and lasor and steam path audit.
|
Turbine
Alignment Tools: Turbine Maintenance Tools
Turbine alignment tools for turbine maintenance including head
set alignment tools, vibrating kit, extension rods, and more for
alignment in your turbine maintenance tool needs.
|
Turbine
Outage Tools by Powerhouse Tool, Inc.
Power House Tool, Inc. has the turbine outage tools used by maintenance
crews throughout the world to reduce downtime during a turbine
outage, downtime or turnaround.
|
Turbine
Taps - High Speed 8 Thread
8 thread taps for maintenance needs. These are also available
in metric turbine taps.
|
Turbine
Tools - Power House Tool, Inc.
specializing in turbine tools, bolt heaters, stud runners, electronic
reading devices, gauges, alignment, dies, adapters, and other
maintenance tools for shut downs and turbine maintenance.
|
Turbine
tools for plant maintenance and shutdowns
Power House Tool has just the right specialty tool for your plant
shut down requirements or unplanned outages. Portable distribution
centers and power turbine tools are our specialty.
|
Turbine
Tools, Turbine Tooling and Bolt Heaters by Power House Tool, Inc.
turbine tools and turbine tooling for the power industry for outages,
maintenance, and portable power needs.
|
Turbine
Wrenches
turbine castellated slugging wrenches, hex long arm wrenches and
other special wrenches for turbine maintenance during your plant
shut down or other outage needs.
|
Turbomachinery
Tools by Powerhouse Tool, Inc.
Power House Tool, Inc. has the turbomachinery and maintenance
tools used by maintenance crews throughout the world to reduce
downtime during a turbine outage, downtime or turnaround in nuclear
power plants and other industrial applications.
|
Universal
Pivot Rings
pivot turbine rings for rolling bearings. 8 thread rings.
|
Wrench
Sockets - Impact and Castellated Sockets
Wrench sockets for turbine maintenance in your plant. Also we
carry castellated and impact sockets.
|
